Water Damage Restoration in Central Texas
Fast, Certified, and On-Site in 60 Minutes
Rapid Dry Moisture Recovery Services IICRC Certified • Owner on Every Job
Serving Belton, Temple, Killeen & surrounding areas 24/7
Water damage restoration is the process of removing standing water, drying the structure, and preventing long-term damage like mold, odors, and material deterioration. Rapid Dry uses thermal imaging, moisture meters, and commercial-grade drying equipment to restore your home to pre-loss condition while following IICRC S500 standards.
As a local Central Texas restoration company, we document moisture readings on every visit so your insurance adjuster can clearly see what was wet, how far it spread, and when it reached dry-standard.
What Is Water Damage Restoration?
Rapid Dry Moisture Recovery Services provides fast, 24/7 emergency water removal in all of Central Texas.
Whether your home is flooded from a burst pipe, appliance leak, or storm damage, our IICRC-certified technicians respond as fast as possible—often within 60 minutes—to begin the water extraction and drying process. We use commercial-grade equipment to stop water damage before it spreads, and we provide detailed documentation for your insurance claim.
If you need water damage restoration in Central Texas, call Rapid Dry now — we’re local, trusted, and always on standby.
Common Causes of Water Damage We Handle
Water can come from unexpected places, and every source requires a different approach to protect your home. These are the most frequent causes we see across Central Texas:
Pipe burst or
leaking pippes
Water Heater
Ruptures
Roof related leaks
Dishwasher and Kitchen leaks
Toilet overflows and backups
AC Drain &
Condensation Lines
Washing machine / supply line failures
Crawlspace and
foundation flooding
How the Restoration Process Works”
Step 1 — Emergency Response
Arrival within 60 minutes to stop active water intrusion.
Step 2 — Inspection & Moisture Mapping
We scan every surface using thermal imaging and professional moisture meters to locate all wet materials — including hidden pockets
Step 3 — Water Extraction
Truckmount-powered extraction removes standing water fast and prevents deeper saturation.
Step 4 — Structural Drying
We install commercial dehumidifiers, air movers, and — when needed — focused heat drying to stabilize the environment and remove moisture from building materials.
Step 5 — Daily Monitoring
Moisture readings are taken every 24 hours, documented, and adjusted to ensure efficient drying that follows IICRC S500 standards.
Step 6 — Job Completion & Documentation
Once drying goals are reached, you receive an insurance-ready report including photos, logs, and recommendations.
Every step follows IICRC S500 standards to ensure safe, complete drying.
How Long Does Water Damage Take to Dry?
Small Jobs
2 to 3 days
Minor leaks affecting one or two rooms.
Carpet and drywall may dry quickly if extraction happens fast.
Daily Moisture Readings
Moisture readings are taken daily to ensure optimal drying potential.
Medium Jobs
3 to 5 days
Multiple rooms, kitchens, or bathrooms with deeper saturation. Requires steady dehumidification and airflow.
Temperature Control
Temperature and humidity control are a key part in properly drying out.
Large Jobs
5 to 7 days+
Whole-home floods, crawlspaces, and long standing water that has been trapped. Structural materials take longer to reach safe moisture levels.
Documentation
Daily documentation is taken for the insurance company to meet insurance standards.
We follow IICRC S500 Standards and keep equipment on site until verified dry - not based on guesswork or preset timelines.
How Much Does Water Damage Restoration Cost?
Water damage jobs vary based on how much water is present, what materials are affected, and how long the structure has been wet. Here’s a general look at typical price ranges in Central Texas:
Small Jobs $650 to $1,200
Minor leaks affecting one or two rooms
Carpet, baseboards, or drywall may be lightly affected
Often involves quick extraction and 1–2 days of drying
Medium Jobs $1,200 to $3,500
Multiple rooms or deeper saturation
More equipment is needed
Drying usually lasts 3–5 days
Large Jobs
$3,500 - $12,000+
Multiple rooms or deeper saturation
More equipment is needed
Drying usually lasts 3–5 days
Most customers pay $0 out of pocket because their adjuster approves the drying portion of the job.
We handle all communication to make the process simple.
What Affects the Cost?
Square footage affected
How long the water sat
Material type (drywall, wood..)
Water category (clean, grey, black)
Equipment needed (dehumidifiers, air movers, HEPA filtration, heat drying)
Why Price Can Vary So Much
No two water
losses are the same.
Even small leaks can become expensive
if water travels under flooring, into walls,
or sits for more than
24 hours.
Drying time, materials,
and contamination
level all change the
scope of work.
Insurance Friendly Pricing
Most water damage restoration jobs are covered by insurance.
Why Choose Rapid Dry?
Rapid Dry is a local, IICRC Certified water damage restoration company serving Central Texas with fast response times and professional equipment.
Residential
Commercial
No Upfront Costs
Full documentation for insurance
Family owned, no franchise pricing.
Locally Owned and Operated
Plus:
60-minute response
Free moisture inspection
Truck-mount extraction
Insurance Approved
IICRC Certified
What Central Texas Homeowners Are Saying
★★★★★ 5.0 Rating on Google – Belton, Temple & Killeen
Real Water Damage Restoration Work
Photos from actual Rapid Dry jobs across Central Texas - including moisture detection, extraction and full structural drying following IICRC S500 standards.
Every Rapid Dry job includes professional moisture mapping, high-volume extraction, and IICRC-standard structural drying.
Proudly Serving Central Texas
Rapid Dry provides fast, certified water damage restoration cross Central Texas. If you’re in the area, we can be at your home within 60 minutes.
Harker Heights
Nolanville
Lampasas
Marble Falls
Burnet
Round Rock
Cedar Park
Austin
Fast response throughout Bell County and surrounding areas.
Water Damage Restoration FAQ
How soon should I respond to water damage?
Immediately. Waiting even a few hours can lead to mold growth, warped materials, and deeper structural damage.
Can I clean up water damage myself?
Small spills can be handled yourself, but anything more than a few square feet requires professional equipment to fully extract moisture and prevent hidden damage.
Is water damage covered by insurance?
Most sudden and accidental water losses are covered. We provide photos, moisture logs, and insurance-ready documentation to make the process simple.
Can water damage lead to mold?
Yes. Mold can begin developing within 24–48 hours under the right conditions and if wet materials aren’t dried quickly and correctly.
How long does the restoration process take?
Small jobs dry in 2–3 days, medium jobs in 3–5 days, and whole-home or crawlspace jobs can take 5–10+ days, depending on material saturation.
Will I need to move out during the restoration?
Usually not. Most homeowners stay in their home during the drying process unless the damage is extensive or affects critical areas like kitchens or bedrooms.
Can you find hidden moisture?
Thermal imaging & moisture detection tools used by Rapid Dry
to locate hidden moisture inside floors and walls.
Have More Questions About Water Damage?
Contact us today - we’re here to help 24/7.